UK's No 1 Custom PC Builder
Rated Excellent by our Customers
3 Year Warranty
PC Help Guide

Monitor Calibration: How to Calibrate Your Monitor

The short answer: there are two ways to calibrate a monitor. The free way is the calibration tool built into Windows, which you adjust by eye. The accurate way is a colorimeter, a small device which sits on the screen, measures it and builds a colour profile for it. Let the monitor warm up for about 30 minutes first, and aim for a 6500K white point and a gamma of 2.2.

Need a PC for design or editing?
01902 714533

A plain note before you read on: Ginger6 builds PCs. We do not sell calibrators or advise on calibration, so this guide is general information taken from Microsoft, Adobe and Datacolor, with each source named.

Before and After Calibration Uncalibrated: a colour cast Calibrated: neutral White point 6500K Gamma 2.2 Brightness 120 cd/m²
30 Mins
Warm-Up Before You Start
6500K
White Point for Screen Work
2.2
Standard Gamma
Monthly
For Colour-Critical Work
Start Here

What Monitor Calibration Is, and the Two Ways to Do It

Monitor calibration, also called display or computer screen calibration, lines your screen’s colours up with a known standard, so what you see is what other people see and what comes back from the printer.

The Windows Calibration Tool

Free, and done by eye. Windows 11 has a display calibration tool built in. It walks you through a few adjustments and saves the result as a new colour profile. Adobe’s view of the tools built into Windows and Mac is blunt: they rely on your eye, and eyes are subjective, so they will not give you accurate colour.

A Colorimeter

Measured, and the way professionals do it. A colorimeter is a small calibration device which fastens to the screen and works with its own software. It measures the colours your monitor shows, compares them with the standard and builds a colour profile for your screen. The Datacolor Spyder is one well-known range.

Where Ginger6 stands: we build the PC. The monitors we sell are standard monitors, and we would not recommend them for colour-critical editing. We do not advise on which specialist monitor or calibrator to buy.

What this page is: the steps and settings published by Microsoft, Adobe and Datacolor, gathered in one place for anyone working out how to calibrate a monitor.

Do These First

Before You Calibrate

Four things to get right first, whichever method you use. The first three are Adobe’s advice. The fourth is ours.

Step Why
1. Let the monitor warm up for about 30 minutes A screen takes time to settle after it is switched on, so it should be at its normal working state before it is measured.
2. Keep direct light off the screen A lamp or a window shining on the panel changes what you and the calibrator see.
3. Match the room lighting to how you work Calibrate in the same light you edit in, so the result suits the conditions you work under.
4. Check the monitor cable is in the graphics card On a desktop PC the monitor plugs into the graphics card, not the sockets higher up on the motherboard. It is the mistake we hear about most after a new PC is delivered.
The Free Way

How to Calibrate a Monitor in Windows 11

These are Microsoft’s own steps for PC screen calibration. It takes a few minutes and needs no extra equipment.

The steps

1. Open Settings, then System, then Display.

2. Choose Color profile.

3. Select Calibrate display and follow the steps on screen.

4. Windows saves the result as a new colour profile for the display the tool is on.

On an HDR monitor, the same button takes you to the Windows HDR Calibration app.

What to expect from it

The Windows tool is adjusted by eye, so the result is only as good as your judgement on the day. It costs nothing. Adobe’s view: tools of this kind will not give you accurate colour. A colorimeter will.

The same Windows page is where colour profiles are added and set as the default for each screen. Our guide to colour profiles explains what they are and which to use.

The Accurate Way

How to Calibrate a Monitor With a Colorimeter

For objectively accurate colour you need a colorimeter. This is how professional monitor calibration is done, and the outline is the same whichever calibration tool you buy.

1. Fit the Device and Open Its Software

The colorimeter fastens to the front of the screen and connects to the PC. Its own software runs the calibration. Some models also measure the light in the room and suggest settings to suit it.

2. Choose Your Target Settings

The software asks for a white point, a gamma and a brightness. The figures to use are in the next section. Follow the maker’s instructions for your model for anything beyond those three.

3. Let It Measure

The process is automatic from here. The colorimeter tests your monitor’s colours against the standard and maps where they differ.

4. Save the Profile

The software creates a colour profile for your screen, also called an ICC profile. Repeat the calibration on a schedule, because a monitor’s colours change as it ages.

The Numbers

Monitor Calibration Settings to Aim For

Three settings do most of the work in monitor colour calibration. These are the figures Adobe and Datacolor publish.

Setting Aim For What It Is
White point 6500K (D65) for screen and video work. 5000K (D50) for still images you plan to print. How warm or cool white looks. A higher figure is bluer, a lower one more yellow. 5000K looks closer to white on paper.
Gamma 2.2 in a normally lit room. 2.4 for a screen in a dark room. How quickly shades step from black to white. 2.2 is the standard on Windows and Mac.
Brightness 120 cd/m² if you print. Otherwise a level comfortable for your room. How much light the screen gives out. Datacolor’s advice is 120 for a print more consistent with your display.

Keep the brightness the same from one session to the next. Correct an image at one level and another at a different level, and the two will not match.

Keeping It Right

How Often, and Do You Need To?

How often to calibrate

Professional colourists recommend calibrating at least once a month. A monitor’s colours drift as it ages, so a profile made last year no longer describes the screen in front of you.

Some monitors made for creative professionals come calibrated from the factory, with a report in the box. It is a good starting point. The colours still change with age, so calibration hardware and the monthly check apply to them too.

Who needs it

Anyone whose work is judged on colour: designers matching brand colours, photographers sending files to print, editors grading video. For them a calibrated screen is the best monitor calibration tip there is, because every later decision rests on it.

If colour is not the point of what you do, calibration is optional. The same goes for a gaming monitor: it will not run any faster for being calibrated. A colourist quoted by Adobe makes the same point: keep your colour adjustments modest and the work usually carries across different devices well enough.

Our Part

Where Ginger6 Fits In

Calibration is about the monitor. What we build is the PC behind it: the graphics card driving your screens, the memory for large files and a machine tested before it leaves us.

Lightroom and Photoshop
Photo Editing PCs
Call Kevin
Photo work leans on memory. Our guide to how much RAM design software needs covers the sizes.
  • Memory matched to your files
  • Fast SSD storage
  • Stress-tested for 24 hours
  • 3-year warranty
Photo Editing PCs
Editing and grading
Video Editing PCs
Call Kevin
Colour grading leans on the graphics card. Our guide to GPU acceleration explains where it earns its place.
  • Graphics card chosen for your software
  • Memory for long timelines
  • Stress-tested for 24 hours
  • 3-year warranty
Video Editing PCs

The monitors we sell are standard monitors, and we do not recommend them for colour-critical editing. For colour-critical work, buy a monitor made for the job from a specialist and calibrate it as above.

FAQ

Common Questions About Monitor Calibration

Open Settings, then System, then Display, and choose Color profile. Select Calibrate display and follow the steps on screen. Windows saves the result as a new colour profile for the display. On an HDR monitor the same button opens the Windows HDR Calibration app.

It is free and quick, and it is adjusted by eye. Adobe says the calibration tools built into Windows and Mac will not give you accurate colour, because they rely on your eye and eyes are subjective. For colour-critical design, photo or video work, use a colorimeter.

For screen and video work, a white point of 6500K (D65) and a gamma of 2.2. For still images you plan to print, Adobe recommends a 5000K (D50) white point. Datacolor recommends a brightness of 120 cd/m² if you print, and otherwise a level comfortable for your room.

For colour-critical work, at least once a month. Professional colourists recommend it because a monitor’s colours change as it ages, so an old profile stops describing the screen accurately.

For accurate colour, yes. A colorimeter fastens to the screen, measures the colours it shows and builds a colour profile, also called an ICC profile, for your monitor. Without one you are adjusting by eye. If colour is not the point of what you do, the built-in Windows tool is the free option.

No. Ginger6 builds PCs. We do not sell calibrators or advise on calibration, and the monitors we sell are standard monitors we would not recommend for colour-critical editing. What we build is the PC behind the screen. Call Kevin on 01902 714533 to talk through a PC for design, photo or video work.

Keep Reading

More Guides for Design and Editing

Colour Profiles Explained

What a colour profile is, and whether to use sRGB, Adobe RGB or CMYK.

Read the Guide

How Much RAM for Design?

32GB or 64GB for Photoshop, Lightroom and InDesign, and how to tell.

Read the Guide

Screen Resolution for Design

How resolution changes the space you have to work in.

Read the Guide
GINGER6

Need a PC for Design or Editing?

Tell Kevin what software you run, how big your files are and how many screens you use. He will spec the PC, build it by hand in Wolverhampton and stress-test it for 24 hours. The person who sells it is the person who builds it.